INTERESTED IN OUR SOLUTIONS?
Make your request 
Product Categories
Home > Products > Bottling Machines > Small bottle (0.3 - 10L) > Water bottling machine (0.3 - 2L)
Water bottling machine (0.3 - 2L)

Automatic rinsing-filling-capping machine to fill mineral water and still drinking water is adopting normal pressure filling system with volume controlled filling, the typical 3-IN-1 water bottling system is composed of the automatic rinsing, filling, inline caps dosing and capping system for the main part, as well as an air conveyor system for the empty bottle loading and a table-top product conveyor for the bottled water output. The controlling system will be through the central PLC system with variable speed adjustment.

 

The empty bottle will be rinsed by treated water in a bottom-up way, then the rinsed bottle will be transported to the filling station by neck-handling star-gear for normal pressure filling, the capping process will be done on the capping unit, which is operated with PICK and PLACE system for setting the caps from the caps tunnel, with high quality plastic caps screwing system. Changeover for another bottle volume takes a minimum time; the process can be controlled from the operating panel and the neck-handling point to fit the different bottle volume format.

 

4-IN-1 automatic sterilizing, rinsing, filling, and capping system was brought to the market, which the sterilizing process is done by an automatic rinsing system using disinfection agent for the inner bottle cleaning before the bottle goes to the pure water cleaning.

 

Features:
  • Rinse, fill and cap the bottle automatically with infinite speed adjust.
  • Filling type: normal pressure filling for still water only.
  • High quality stainless steel pumps with totally enclosed fan cooled motors.
  • Emergency stop and other safety features provide unparallel operator safety.
  • Cap holding bin with rotational cap feeding system for 28/30mm flat caps,
  • Automatic turnover the reversed caps.
  • Complete air conveyor and bottled conveyor solution.
Parameters
  • Bottle filling rate:
    3000-36000pcs/hr
  • Bottle size:
    0.5li-0.75lt-1.5lt
  • Bottle shape:
    Round bottle or square bottle
  • Bottle diameter:
    50-110mm
  • Bottle height:
    150-310mm
  • Bottle filling type:
    Normal pressure filling
  • Washing pressure:
    0.25Mpa
  • Power supply:
    AC380V 50Hz 3ph
  • Air consumption:
    1.2M3/min.
  • Operating pressure:
    0.8Mpa
  • Related Content